Industry Directory | Manufacturer
The UK's largest producer of ultra pure solder alloys for the electronics assembly and HASL industry across Europe.
Industry Directory | Manufacturer
AIM is a leading global manufacturer of solder assembly materials for the electronics industry.
New Equipment | Solder Materials
FCT Assembly Fluxes are designed to be used with both SN100c and SAC305 alloys. By combining our latest flux tecnologies with SN100c, FCT Assembly has an advantage over all other suppliers in paste, wire and flux. FCT Assembly Flux Comparisons:
New Equipment | Solder Materials
Down hole electronics, such as oil and gas exploration, require solder alloys that have the durability to withstand the extreme thermal, geological and mechanical stresses of these applications. AIM understands system reliability is of the utmost imp
Electronics Forum | Tue Jun 27 08:38:03 EDT 2006 | cuculi54986@yahoo.com
I tried some SN100C from AIM... On only one array. It flowed well on the chips but did not like the finish on the SOT23's on the board. I did not have enough arrays to mess around, so we switched it over to SAC305 and had no issues. I'm guessing w
Electronics Forum | Fri May 05 09:00:46 EDT 2006 | russ
Studies showed that there are no issues mixing SN100C and SAC305, I believe that AIM has this info. Russ
Used SMT Equipment | Soldering - Wave
Vitronics Wave Soldering Machine Model: Delta 6622C Vintage: 2006 Lead-Free (SN100C) Internal Dual Spray Fluxer (2) Bottom-Side Convection Preheat Zones (1) Bottom-Side Cal Rod Preheat Zone (1) Top-Side IR Preheat Zone Cast Iron Solder Pot Mix of L a
Used SMT Equipment | Soldering - Wave
Vitronics Soltec 6622CC Wave Soldering Machine (Pb Free) (2006) Brand: Vitronics Model: Soltec 6622CC Type: Wave Soldering Machine (Pb Free) Year: 2006 Serial #: 0603804401 Machine Specifications: Top preheat: Zone 2 and 3 top side Calrod
Industry News | 2023-03-16 14:31:59.0
The SMTA is pleased to announce the Best Papers from SMTA International 2022. The winners were selected by members of the conference technical committee. For these exceptional achievements, a plaque is given to primary authors of all winning papers.
Industry News | 2020-03-19 13:12:42.0
The SMTA is pleased to announce the Best Papers from SMTA International 2019. As speakers at SMTA International, individuals make contributions to the industry by sharing their research and findings. For these exceptional achievements, a cash award and plaque are given to primary authors of all winning papers.
Technical Library | 2008-03-31 21:35:36.0
While the situation varies from country to country, nearly one year after the EU RoHS Directive came into force implementation of lead-free solder is progressing steadily. For lead-free soldering to be considered successful it is not sufficient just to have dealt with the challenges of mass production. It is also necessary to establish that the soldered joints produced are at least as reliable as those made with Sn-37Pb alloy. In this context "reliability" means the length of time in service that the initial functionality of the joint can be maintained. In this paper we will discuss some of the issues involved in solder joint reliability through a comparison of the properties of two alloys that are widely used for lead-free wave soldering, SAC305 (Sn-3.0Ag-0.5Cu) and the Sn, Cu, Ni, Ge alloy SN100C.
Technical Library | 2021-08-25 16:34:37.0
As the traditional eutectic SnPb solder alloy has been outlawed, the electronic industry has almost completely transitioned to the lead-free solder alloys. The conventional SAC305 solder alloy used in lead-free electronic assembly has a high melting and processing temperature with a typical peak reflow temperature of 245ºC which is almost 30ºC higher than traditional eutectic SnPb reflow profile. Some of the drawbacks of this high melting and processing temperatures are yield loss due to component warpage which has an impact on solder joint formation like bridging, open defects, head on pillow.
SN100C P810 D4????????? ???????????? ??????????????????????????????????? ?????????????? ???http://www.nihonsuperior.co.jp/
ALPHA® Preforms with solder paste adds solder volume.
High Reliability Lead-free Solder SN100C(Sn-0.7Cu-0.05Ni+Ge) High Reliability Lead-free Solder SN100C(Sn-0.7Cu-0.05Ni+Ge) While the situation varies from country to country, nearly one year after the EU RoHS Directive came into force
